
Horizontal Pile Cloth Disc Filter
Horizontal design for high flow rates and easy maintenance access
- Designed for high flow rates in a single unit
- Low installation height – suitable for buildings with limited headroom
- Excellent maintenance access to every disc segment
- Modular extension by adding disc segments
- Fully automatic operation, no interruption during backwash
Image gallery


Technical data
| Filter area | 30 – 165 m² |
| Flow rate | 300 – 1,650 m³/h |
| TSS effluent | < 2 mg/l |
| Filtration fineness | 5 or 10 µm pile cloth |
| Installation height | Low-profile design |
| Material | Stainless steel 1.4301 / 1.4571 |
Indicative values. Final data is confirmed project-specifically.
How it works
Inlet
Wastewater is distributed evenly along the horizontal filter tank.
Filtration
The flow passes through the pile cloth discs; filtrate is collected centrally.
Backwash
Suction bars traverse the disc surface and remove the retained solids.
Discharge
Filtrate leaves the unit by gravity; backwash sludge is returned to the process.
Typical applications
Sizes & configurations
RF-HCF series — horizontal pile cloth disc filters
| Model | Discs | Filter area (m²) | Max. hydraulic capacity (m³/h) |
|---|---|---|---|
| RF-HCF-6 | 6 | 30 | 300 |
| RF-HCF-7 | 7 | 35 | 350 |
| RF-HCF-8 | 8 | 40 | 400 |
| RF-HCF-9 | 9 | 45 | 450 |
| RF-HCF-10 | 10 | 50 | 500 |
| RF-HCF-11 | 11 | 55 | 550 |
| RF-HCF-12 | 12 | 60 | 600 |
| RF-HCF-13 | 13 | 65 | 650 |
| RF-HCF-14 | 14 | 70 | 700 |
| RF-HCF-15 | 15 | 75 | 750 |
| RF-HCF-16 | 16 | 80 | 800 |
| RF-HCF-17 | 17 | 85 | 850 |
| RF-HCF-18 | 18 | 90 | 900 |
| RF-HCF-19 | 19 | 95 | 950 |
| RF-HCF-20 | 20 | 100 | 1000 |
| RF-HCF-21 | 21 | 105 | 1050 |
| RF-HCF-22 | 22 | 110 | 1100 |
| RF-HCF-23 | 23 | 115 | 1150 |
| RF-HCF-24 | 24 | 120 | 1200 |
| RF-HCF-25 | 25 | 125 | 1250 |
| RF-HCF-26 | 26 | 130 | 1300 |
| RF-HCF-27 | 27 | 135 | 1350 |
| RF-HCF-28 | 28 | 140 | 1400 |
| RF-HCF-29 | 29 | 145 | 1450 |
| RF-HCF-30 | 30 | 150 | 1500 |
| RF-HCF-31 | 31 | 155 | 1550 |
| RF-HCF-32 | 32 | 160 | 1600 |
| RF-HCF-33 | 33 | 165 | 1650 |
Modular design — intermediate configurations are available. 5 m² filter area and up to 50 m³/h per disc. Final sizing is subject to engineering verification.
Filter media selection
| Media type | Max. TSS loading (g/m²·h) | Typical max. TSS inlet (mg/L) | Phosphorus capability | Application focus |
|---|---|---|---|---|
| 5 micron pile cloth | 250 | 30 | < 0.2 mg/L achievable | Advanced tertiary treatment & phosphorus reduction |
| 10 micron pile cloth | 700 | 70 | Polishing stage (depends on conditions) | Higher solids load & general tertiary polishing |
Performance depends on influent characteristics and effluent requirements. The decisive design input is the TSS load at the filter inlet.
Indicative values. Final data is confirmed project-specifically.
Related products
Request technical sizing
Our engineers size your plant to your specific requirements.
Book a consultation
Talk to our engineers directly about your project.