Solutions by challenge
Start from your problem and find the technology that solves it.
High suspended solids in the effluent
TSS values above the discharge limit, turbidity peaks or carry-over from the clarifier.
Solution FinderToo much sludge to dispose of
High disposal cost caused by low dry solids content and large sludge volumes.
Solution FinderPhosphorus limits exceeded
Total phosphorus above the permit value, precipitation not sufficiently effective.
Solution FinderFats, oils and grease in the wastewater
FOG loads that overload downstream treatment stages or block pipework.
Solution FinderClarifier or plant at capacity
Production growth or hydraulic peaks beyond the design capacity of the existing plant.
Solution FinderDischarge fees too high
Surcharges for COD, TSS or nutrients in the municipal sewer bill.
Solution FinderNo space for a new plant
Limited footprint, retrofit inside an existing building or on an existing tank.
Solution FinderTemporary or seasonal demand
Capacity needed for a limited period, during a shutdown or for a trial campaign.
Solution FinderDiscuss your application
Send us your parameters and we will come back with a technical recommendation.